The development of a resource-efficient photovoltaic system

This paper presents the measures taken in the demonstration of the photovoltaic case study developed within the European project ‘Towards zero waste in industrial networks’ (Zerowin), integrating the D4R (Design for recycling, repair, refurbishment and reuse) criteria at both system and industrial network level. The demonstration is divided into three phases. The first phase concerns the development of a D4R photovoltaic concept, the second phase focused on the development of a specific component of photovoltaic systems and the third phase was the demonstration of the D4R design in two complete photovoltaic systems (grid-connected and stand-alone). This paper includes a description of the installed photovoltaic systems, including a brief summary at component level of the lithium ion battery system and the D4R power conditioning system developed for the pilot installations. Additionally, industrial symbioses within the network associated with the photovoltaic systems and the production model for the network are described

Towards Prospective Life Cycle Assessment: How to Identify Key Parameters Inducing Most Uncertainties in the Future? Application to Photovoltaic Systems Installed in Spain

The final publication is available at Springer via http://dx.doi.org/10.1007/978-3-319-09150-1_51International audienceProspective Life Cycle Assessment (LCA) is a relevant approach to assess the environmental performance of future energy pathways. Amongst different types of prospective scenarios, cornerstone scenarios meant for complex systems and long-term approaches, are of interest to assess such performance. They rely on different types of long-term projections, such as projections of technological evolutions and of energy resources. In most studies, scenarios are defined with single values for each parameter, and environmental impacts are assessed in a deterministic way. Inherent uncertainties related to these prospective assumptions are not considered and prospective LCA uncertainties are thus not addressed. In this paper we describe a methodology to account for these uncertainties and to identify the parameters inducing most of the uncertainties in the prospective LCA results. We apply this approach to prospective LCAs of photovoltaic-based electricity generation systems

QTL for phytosterol and sinapate ester content in Brassica napus L. collocate with the two erucic acid genes

Improving oil and protein quality for food and feed purposes is an important goal in rapeseed (Brassica napus L.) breeding programs. Rapeseed contains phytosterols, used to enrich food products, and sinapate esters, which are limiting the utilization of rapeseed proteins in the feed industry. Increasing the phytosterol content of oil and lowering sinapate ester content of meal could increase the value of the oilseed rape crop. The objective of the present study was to identify quantitative trait loci (QTL) for phytosterol and sinapate ester content in a winter rapeseed population of 148 doubled haploid lines, previously found to have a large variation for these two traits. This population also segregated for the two erucic acid genes. A close negative correlation was found between erucic acid and phytosterol content (Spearman’s rank correlation, rs = −0.80**). For total phytosterol content, three QTL were detected, explaining 60% of the genetic variance. The two QTL with the strongest additive effects were mapped on linkage groups N8 and N13 within the confidence intervals of the two erucic acid genes. For sinapate ester content four QTL were detected, explaining 53% of the genetic variance. Again, a close negative correlation was found between erucic acid and sinapate ester content (rs = −0.66**) and the QTL with the strongest additive effects mapped on linkage groups N8 and N13 within the confidence intervals of the two erucic acid genes. The results suggests, that there is a pleiotropic effect of the two erucic acid genes on phytosterol and sinapate ester content; the effect of the alleles for low erucic acid content is to increase phytosterol and sinapate ester content. Possible reasons for this are discussed based on known biosynthetic pathways

Why are we not flooded by involuntary thoughts about the past and future? Testing the cognitive inhibition dependency hypothesis

© The Author(s) 2018In everyday life, involuntary thoughts about future plans and events occur as often as involuntary thoughts about the past. However, compared to involuntary autobiographical memories (IAMs), such episodic involuntary future thoughts (IFTs) have become a focus of study only recently. The aim of the present investigation was to examine why we are not constantly flooded by IFTs and IAMs given that they are often triggered by incidental cues while performing undemanding activities. One possibility is that activated thoughts are suppressed by the inhibitory control mechanism, and therefore depleting inhibitory control should enhance the frequency of both IFTs and IAMs. We report an experiment with a between-subjects design, in which participants in the depleted inhibition condition performed a 60-min high-conflict Stroop task before completing a laboratory vigilance task measuring the frequency of IFTs and IAMs. Participants in the intact inhibition condition performed a version of the Stroop task that did not deplete inhibitory control. To control for physical and mental fatigue resulting from performing the 60-min Stroop tasks in experimental conditions, participants in the control condition completed only the vigilance task. Contrary to predictions, the number of IFTs and IAMs reported during the vigilance task, using the probe-caught method, did not differ across conditions. However, manipulation checks showed that participants’ inhibitory resources were reduced in the depleted inhibition condition, and participants were more tired in the experimental than in the control conditions. These initial findings suggest that neither inhibitory control nor physical and mental fatigue affect the frequency of IFTs and IAMs.Peer reviewedFinal Published versio

Extent and structure of linkage disequilibrium in canola quality winter rapeseed (Brassica napus L.)

Linkage disequilibrium was investigated in canola quality winter rapeseed to analyze (1) the prospects for whole-genome association analyses and (2) the impact of the recent breeding history of rapeseed on linkage disequilibrium. A total of 845 mapped AFLP markers with allele frequencies ≥0.1 were used for the analysis of linkage disequilibrium in a population of 85 canola quality winter rapeseed genotypes. A low overall level of linkage disequilibrium was found with a mean r2 of only 0.027 over all 356,590 possible marker pairs. At a significance threshold of P = 2.8 × 10−7, which was derived by a Bonferroni correction from a global α-level of 0.1, only 0.78% of the marker pairs were in significant linkage disequilibrium. Among physically linked marker pairs, the level of linkage disequilibrium was about five times higher with more than 10% of marker pairs in significant linkage disequilibrium. Linkage disequilibrium decayed rapidly with distance between linked markers with high levels of linkage disequilibrium extending only for about 2 cM. Owing to the rapid decay of linkage disequilibrium with distance association analyses in canola quality rapeseed will have a significantly higher resolution than QTL analyses in segregating populations by interval mapping, but much larger number of markers will be necessary to cover the whole genome. A major impact of the recent breeding history of rapeseed on linkage disequilibrium could not be observed

Recovery of critical metals from dilute leach solutions – Separation of indium from tin and lead

The strategic metal indium is recovered from solutions containing tin and lead that are typical of those obtained from leach solutions of metal component fractions of electronic waste including the leach solutions from indium tin oxide thin film conductive layers that contain only indium and tin. Almost total recovery of the metals can be achieved from nitric, perchloric and acetic acid leach solutions using a novel cylindrical mesh electrode electrolysis cell under appropriate conditions. The optimum separation of indium from tin and lead is achieved by a novel three-stage process from nitric acid media in the presence of SCN− as a complexing agent. Lead is removed from dilute indium-tin-lead solutions in the first stage from 0.1 mol L−1 nitric acid solution by electrodeposition over an 8 h period in the absence of SCN− to give a residual solution containing a maximum of 2 mg L−1 of lead (97% recovery). Tin is removed in the second stage by electrodeposition over an 8 h period from the solution after addition of 0.02 mol L−1 SCN− to give a maximum residual electrolyte tin concentration of 3 mg L−1 (94% recovery). In the third stage indium is recovered at the anode of the cylindrical mesh electrode cell as an oxy-hydroxide phase by increasing the SCN− concentration to 0.1 mol L−1 and carrying out the electrolysis for a period of 24 h to give a residual solution containing 1 mg L−1 of indium (98% recovery).We acknowledge the support of an EPSRC/LINK WMR3 grant (GR/L03217) with Fluid Dynamics International Limited. We wish to thank Aleppo University for a scholarship to NY and Professor. J. D. Donaldson for all his advice and support

Office of Saline Water Reports

Report comparing "the capital and operating costs of an upflow and downflow plant" (p. 2). Cost saving recommendations are made

Office of Saline Water Reports

Report regarding the feasibility of placing a desalting plant at Brownsville, Texas, at one of three possible locations

Obsolescence of electronics - the example of smartphones

Planned obsolescence has recently been a common allegation to manufacturers, but proof apart from isolated cases is missing. This paper analyses the situation for smartphones, looks at use- and lifetime of smartphones and the underlying reasons for their obsolescence. Surveys show that a majority of consumers believes in "planned obsolescence" as a fact on the market and would like to have more durable products. Regarding smartphones, broken screens and bad battery performance are often reported problems. At the same time, most phones are still functioning when being replaced after the average use time of two years. How do these two aspects combine? Short product cycles, new functionalities and features trigger replacement purchases (functional and psychological obsolescence) more strongly than broken devices. Necessary repair of products is expensive due to miniaturized product design, glued in batteries, and the limited availability of replacement parts (economical obsolescence). Besides, buying new products is often subsidized by provider contracts